Free Shipping on $50+   |   (877) 534-4621    | info@lightfixtureindustries.com

Marker | Photoluminescent | Aluminum | Emergency Exit Only [PTM-EMEX-AL]

20.00 20.0 USD 20.00

1.00

    This combination does not exist.

    Photoluminescent

    This unit uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.

    No Electricity

    This unit doesn't require electricity or a battery.

    Peel Off

    The unit has a peel off backing with 3M tape for easy wall mounting configuration.

    FEATURES

    • Emergency Egress/Safety Sign
    • Aluminum frame
    • No power or wiring required
    • Requires continued exposure to at least 54 LUX illumination
    • Indoor use only
    • No future hazmat disposal needed
    • Not UL Approved


    SPECIFICATIONS

    Dimensions
    Length 12"
    Height 7"
    Weight 2.00 lb

    CONSTRUCTION

    The PTM-EMEX-AL series exit sign is constructed with non-toxic, non-radioactive material. Made from strong rigid aluminum frame.

    ILLUMINATION

    Under normal lighting conditions, these signs are highly visible. In the event of low or no lighting due to power failure, the lettering on the signs will "Glow in the Dark". (Signs must be "charged" to glow -- requires 54 LUX (5ft candles) of fluorescent, metal halide or mercury vapor light illumination for 60 minutes).

    EMERGENCY OPERATION

    Upon failure of the normal utility power, this unit will provide at least 90 minutes of illumination. *This sign must be charged for a minimum of 60 minutes prior to being fully operational.

    BATTERY - BATTERY BACKUP

    The PTM-EMEX-AL series exit sign does not require any type of battery to operate; it is 100% power-free.



    INSTALLATION

    The PTM-EMEX-AL series sign features drilled holes on each corner for mounting. The sign can be mounted using double sided tape or screws with anchors for optimal support (not included).

    DIMENSIONS