Free Shipping on $50+   |   (877) 534-4621    | info@lightfixtureindustries.com

Marker | Photoluminescent | 'Fire Extinguisher Inside' [PFEI]

A simple way to add additional emergency egress signage. Identifies emergency evacuation route.
No electricity or battery required. These signs can be easily placed on any flat surface using double-sided tape (not included). Under normal lighting conditions, these signs are highly visible. In the event of low (or absence of) lighting due to power failure the signs will "glow-in-the-dark." (Signs must be "charged" to glow, requires exposure to 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light illumination).

34.00 34.0 USD 34.00

34.00

    This combination does not exist.

    Photoluminescent
    This unit uses long lasting, electricity free Photoluminescent Lighting (Glow in the Dark) Technology.
    No Electricity
    This unit doesn't require electricity or a battery.

    FEATURES

    • Emergency Egress/Safety Sign
    • Explosion proof semi-rigid plastic
    • No power or wiring required
    • Requires continued exposure to at least 54 LUX illumination
    • Indoor use only
    • No future hazmat disposal needed
    • Note: this unit is not UL924 approved

    Previous Product Codes: PFEI


    SPECIFICATIONS

    Dimensions
    Width 10"
    Height 7"
    Depth 0.625"
    Weight 4.00 lb


    CONSTRUCTION

    This photoluminescent Egress Sign is constructed with non-toxic, non-radioactive Glo Brite ® photoluminescence technology.

    ILLUMINATION

    Under normal lighting conditions, these signs are highly visible.  In the event of low or no lighting due to power failure, the lettering on the signs will "Glow in the Dark".  (Signs must be "charged" to glow -- requires 54 LUX (5ft candles) of fluorescent, metal halide or mercury vapor light illumination for 60 minutes).  

    EMERGENCY OPERATION

    Upon failure of the normal utility power, this unit will provide at least 90 minutes of illumination.  *This sign must be charged for a minimum of 60 minutes prior to being fully operational.


    INSTALLATION

    No electricity or battery required.  These signs can be easily placed on any surface using double-sided tape (not included).

    Mounting Configurations Explained