|
|
| Dimensions |
| Height |
Width |
Depth |
| 8.5″ |
11.0″ - 15.875″ |
0.04″ |
|
|
|
|
|
|
- • Photoluminescent Exit Sign
- • Produced on Durable 0.04″ Aluminum Substrate
- • Explosion-Proof
- • No Power Required – Illuminated Through Photoluminescence
- • (Sign Needs to be Charged for Minumum 60 Minutes to Obtain 90 Minute Operation)
- • Meets NFPA Life Safety Code 101 and ETL Listed to Meet UL 924
- • Select Arrow Directionality On Order
- • Suitable for Floor Proximity Mounting
- • 4 Pre-Drilled Mounting Holes for Easy Installation Using Standard Screws/Nails (Hardware Not Included)
- • Optional Frame Available
- • Easy Installtion -- No Wiring
- • Maximum Viewing Eistance - 50 Feet
- • 20 Year Warranty
- • No Future HazMat Disposal
- • Indoor Use Only (Do Not Leave Exposed To Direct Sunlight)e
- • No Maintenance Required
|
|
A simple, efficient way to add additional exit signs. No electricity or battery required. These signs can be easily placed on any flat surface using
double-sided tape, by screw, or nail (not included) using the four pre-drilled mounting holes. An optional brushed aluminum frame allows for secure flush installation or even ceiling and side
installation.
Under normal lighting conditions, these signs are highly visible. In the event of low (or absence of) lighting due to power failure, the lettering on the
signs will “glow-in-the-dark”. (Signs must be ″charged″ to glow – requires exposure to 54 LUX (5-ft candles) of fluorescent, metal halide or mercury vapor light illumination). Note: a
minimum 5 foot candles external unfiltered fluorescent illumination must be present on sign face at all times during building occupancy.
On ordering, select arrow directionality (left arrow, right arrow, no arrows, or both arrows), and framed or frameless sign. Additional costs may
apply.
|